View previous topic :: View next topic |
Author |
Message |
terryjm1
Joined: 27 Sep 2005 Posts: 119 Location: St. Louis, MO
|
Posted: Mon Dec 04, 2006 12:01 pm Post subject: Spare parts for sale |
|
|
Im am switching gears a bit on my E10 clone project so I have some spare Solectria parts I am not going to use so I am going to offer them here first. If there is no interest here, I'll probably ebay them.
Here is the list:
3 used DC30-500 motor controllers. (these are great for AC and PS motor controllers on high voltage E10s) $250 each or $650 for all three
2 used Zivan NG3 chargers (They are set to charge at 288 volts, but can be reprogrammed to lower voltages by Greg McCrea) $350 each.
1 like new UMOC 445TF motor controller (it is used but for only about 20 miles under the watchful eyes of Azure employees. I purchased it from Azure when they upgraded a citivan to a DMOC. It works perfect and currently has a charge profile for an E10 truck. However, they are fairly easy to program and could easily be used in a Force as a much heavier duty upgrade from the original controller. $1350.) I'll even throw in a notebook computer perfect for programming a UMOC.
1 set of front and rear battery boxes for an E10. ($300)
1 heavy duty/light weight rear axle from a 1996 E10 ($250)
I also have a dead UMOC340 I'll let go for $100.
If someone wants to make me an offer on everything, I am listening. _________________ Terry Merrell
tmerrell2@sbcglobal.net |
|
Back to top |
|
 |
MajorWilson

Joined: 26 Sep 2005 Posts: 236 Location: Peoria, AZ
|
Posted: Sat Jan 27, 2007 7:20 pm Post subject: |
|
|
Terry, you wouldn't happen to have any of the thermistors from the battery boxes would you? I need one or two. _________________ Jeff Wilson
US Army (Ret)
Plug in the cord... not the pump! |
|
Back to top |
|
 |
|