PortEV Forum Index PortEV
Electric Vehicle Discussion Forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

UMOC 445 Parameters

 
Post new topic   Reply to topic    PortEV Forum Index -> Solectria E-10
View previous topic :: View next topic  
Author Message
terryjm1



Joined: 27 Sep 2005
Posts: 119
Location: St. Louis, MO

PostPosted: Fri Dec 16, 2005 5:38 pm    Post subject: UMOC 445 Parameters Reply with quote

This is what was spit out by my UMOC with Hyperterminal. Just thought you might be curious.

Solectria UMoC 440, v1.6B12, Tue Apr 20 14:55:24 1999 Config: 0

Calibrating:
0
0
1 1 1 0

Hit Enter

ad 23 242 1021 1020 2 595 56 136
D -1 -1 -1 I 0A 0A 0A

INFO: LIMITS TO TORQUE:
ped_T 0 Pwr Svr: 1.0 Relay: ON
Id 0.0 A Mtr Temp: 1.00 Power Stage: DISABLED
Iq 0.0 A Box Temp: 1.00 Regen: ENABLED
Temp 19.1 C Dev Temp: 0.60 Err PAL: LEDPwr
Bat. 291.4 V BatV: 1.00 Last err:
Rotor 0 rpm Speed: 0.00 NEUTRAL

Solectria UMoC 440, v1.6B12, Tue Apr 20 14:55:24 1999 Config: 0
p Paramtrs. | A Auto Prgm | W Wr.EEPROM
B reBoot | d Disable | e Enable
b Bat. cal. | a Amp. cal. | D Download
z Zero Slip | S SWT2 pts |


0 Max Bat. Volts:326.0 V vs 364.0 1 Max Fwd Speed : 12.0 kRPM
2 Min Bat. Volts:236.9 V vs 234.0 3 Brake Min Spd.: 0.4 kRPM vs 0.2
4 Max Pwr Mtr I :400.0 Apk vs 350.0 5 Brake Lt Curr.: 90.0 Apk vs 50.0
6 Max Reg Mtr I :250.0 Apk vs 170.0 7 Pedal MaxBrake: 0.10
8 Power Svr. Min: 60 A vs 20 9 Pedal Brake : 0.30
10 Power Svr. Max: 180 A 11 Pedal Accel : 0.40
12 Regen Bat Max : 100 A vs 60 13 Pedal MaxAccel: 0.85
14 Shaft Dir. : -1 15 Speed Limiting: 1.0 kRPM vs 3.0
16 Bat. Limiting : 16.0 V vs 30.0 17 Brake Limiting: 1.0 kRPM
18 Vel. Damp tau : 0.10 sec 19 Slip constant : 0.80 Hz
20 Acc. Damp tau : 0.03 sec 21 Maximum id : 85.0 A vs 80.0
22 Damp viscocity: 0.00 NMs/r vs 0.50 23 Max Sync. Ind.: 2.70 mH vs 2.40
24 Configuration#: 0 25 Max Leak. Ind.: 0.20 mH vs 0.30
26 Torque Slew : 2500 vs 2000 27 50% Ind. Cur. : 400 A vs 150
28 Eff IGBT Res : 44.0 mOhm vs 62.0 29 Encoder pulses: 48
30 Vbatt Decay : 0.20 vs 0.10 31 Speed Decay : 0.10
32 V utilization : 1.00 33 Crossover Comp: 5

_________________
Terry Merrell
tmerrell2@sbcglobal.net
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    PortEV Forum Index -> Solectria E-10 All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group